Dodge Charger Key Fob Replacement
Lost the key or need a spare fob for your Dodge Charger? A mobile locksmith comes to you and programs it on-site, same day, well under dealer pricing.
Locked out of your Dodge Charger or down to one working key fob? We program Charger keys and fobs on-site by VIN, usually same day, for well under what the Dodge dealer charges. Our mobile tech comes to you in McKinney or anywhere in North Dallas, cuts the blade, and pairs the fob right in your driveway.
- Key or fob cut to your VIN
- Programmed & tested on-site
- Mobile: we come to your car
- Usually well under dealer pricing
*Flat estimate for a standard transponder key. Proximity / push-to-start smart fobs cost more, and the exact price is quoted on the call before any work.
Dodge Charger Keys & Fobs
The Dodge Charger has used a few key types depending on year. Earlier cars (roughly 2006-2010) run a remote-head key with a transponder chip in the head and a laser-cut (sidewinder) blade. Around 2011-2014 many Chargers moved to the FOBIK ("fob-integrated key") that twists in a dash slot. From the 2015 facelift forward, most push-to-start Chargers use a proximity smart fob with passive keyless entry and a hidden emergency blade inside. All of these are encrypted to the car's security system, so a new key or fob has to be cut to the cylinder (or the blade matched) and the transponder/proximity data programmed to your VIN before the car will crank. We do both on-site with Autel and Xtool gear.
A common one on Chargers, especially the 2011-2014 FOBIK and the proximity fobs, is the rubber button pad wearing through and the case cracking at the seam from years in a pocket. The car still starts because the transponder/proximity chip is fine, but lock, unlock, and trunk stop responding. Often it's just a dead CR2032 coin cell, which we swap in a minute. If the buttons themselves are worn or the case is split, we replace the fob shell or the whole fob and reprogram it to your VIN so everything works again.
Dodge Charger Key Fob FCC IDs
Flip your fob over: the FCC ID is printed on the back of the case. Find it below, or just read it to our dispatcher. It tells us the exact remote your Dodge Charger takes before the van rolls out.
| Years | Key type | FCC ID |
|---|---|---|
| 2008-2010 | FOBIK key | IYZ-C01C |
| 2011-2023 | Proximity smart fob | M3N-40821302 |
Spare key with a working key in hand: from $75. Full replacement, no key at all: from $189. Smart and proximity fobs price above basic chip keys; the exact flat number comes with your VIN on the call.
Trim and market can change the fob, and several IDs often fit one model year. We confirm the exact part by VIN on every job, so a mismatched guess never reaches your driveway.
Not sure if yours is a transponder key, flip remote or smart fob? Our car key types guide shows every kind with photos.
Frequently Asked Questions
Yes. We program Charger fobs on-site by VIN with Autel and Xtool tools, the same kind of pro equipment the dealer uses. You don't tow the car or sit in a service lane, and it's usually same day.
Yes, all-keys-lost is a job we do regularly. We pull the key data off your VIN, generate a fresh proximity smart fob, cut the hidden emergency blade, and pair it to the car so push-to-start works. It takes longer than adding a spare, so budget a little extra time.
It depends on the year and fob type. The older remote-head and FOBIK keys are cheaper; the newer proximity smart fobs cost more because the part itself is pricier. Most Charger jobs run well under dealer pricing. We confirm the exact price by VIN before any work starts.
Yes. A 2013 Charger uses the FOBIK that twists in the dash slot, which we program to the car's security module on-site. The earlier 2006-2010 remote-head keys and the 2015-and-up proximity smart fobs are stocked as well. Any Charger year works, and the VIN tells us which fob to load before we head out.
It depends on the year. 2008-2010 Dodge Charger: IYZ-C01C; 2011-2023 Dodge Charger: M3N-40821302. The ID is printed on the back of your fob case. Trim and market can change it, so we confirm the exact part by VIN before the van rolls out.