Automotive Locksmith · We Come to You
Chrysler Car Key Replacement & Key Fobs
Locked out of your Pacifica or down to no working remote on your 300? We come to you, cut and program your Chrysler key fob on-site, and get you rolling the same day.
Get Your Flat Quote
Apex Locksmith Pros · Same-day service
Keys & fobs for
Chrysler
- Models listed
- 2
- Key types
- 2
- FCC IDs
- 3
Chrysler key fob replacement for the Pacifica, the 300 and the rest of the lineup is handled at your car by Apex Locksmith Pros, a mobile locksmith serving McKinney and nearby cities daily from 8 AM to 8 PM. The Pacifica and newer 300 run push-to-start proximity fobs on an encrypted rolling code with a fold-out emergency blade, while older 300s and base trims use a transponder remote-head key that must be programmed to the immobilizer. The mechanical side is usually a high-security laser-cut blade, which a hardware store cannot copy. We read the key type from the car and VIN, cut the right blade and program the fob to your immobilizer. The flat total is quoted on the phone before dispatch.
Updated:
See Chrysler modelsWhat Keys Do Chrysler Vehicles Use?
Most Chryslers on the road use one of two setups. The Chrysler 300 and Pacifica both run proximity (push-to-start) smart fobs that talk to the car over an encrypted rolling code, with a fold-out emergency blade tucked inside for the door. Older 300s and base trims used a transponder remote-head key, where the chip in the head has to be programmed to the immobilizer before the engine will crank, plus a cut blade for the lock cylinder. Across the lineup the mechanical side is usually a high-security sidewinder (laser-cut) blade rather than a standard edge-cut, which is why a hardware store can't copy it. We read the key type off the car and the VIN, cut the right blade, and program the fob to your specific immobilizer.
Smart / proximity fob
Stays in your pocket for push-button start. Most carry a hidden emergency blade for the door.
FOBIK key
A fob-integrated key that plugs into a slot in the dash instead of a keyed ignition.
Seen on
Lost every Chrysler key?
No spare and the only fob is lost or stolen? That's a lost-all-keys job, and we handle it on-site. We pull your key code by VIN, cut a fresh sidewinder blade to match your locks, and connect to the car to add the new smart fob to the immobilizer. On the proximity-equipped 300 and Pacifica that means programming a brand-new fob and, when the security setup calls for it, wiping the old lost fobs so a missing key can't start your van. You don't need the original in hand, and you don't need a tow.
Second Car Key, Same Visit
The tech is already at your car, so a spare cut on the spot runs half price.
Code KEY50
One coupon per job, offers don't stack. Mention the code on the phone and the dispatcher applies it to your flat quote.
Chrysler Models We Cover
Key and fob replacement for popular Chrysler models, on-site in McKinney, Plano, Frisco and nearby cities.
Chrysler key types and FCC IDs by year
The FCC ID is printed on the back of your fob. Match it here, or read it to the dispatcher on the call.
| Model | Years | Key type | FCC ID |
|---|---|---|---|
| Chrysler Pacifica | 2017-2024 | Proximity smart fob | M3N-97395900 |
| Chrysler 300 | 2008-2010 | FOBIK key | IYZ-C01C |
| Chrysler 300 | 2011-2023 | Proximity smart fob | M3N-40821302 |
Not sure which key your Chrysler takes? Call with the year and model and we will tell you.
How We Replace a Chrysler Key
Four steps, all at your car. You know the flat total before a tech is sent.
- 1
Call with year and model
Tell us what you drive and whether a working key is left. You hear the flat total before anyone is sent.
- 2
We come to your car
A mobile tech drives to your driveway, office lot or parking garage. No tow to the dealer.
- 3
Cut to your VIN
The key code is decoded from your VIN and the blade is cut to match your doors and ignition.
- 4
Programmed and tested
The chip or fob is programmed to the immobilizer and tested on the car before the tech leaves.
Chrysler key prices
Flat quote before dispatchSpare key
You still have a working key
From$119+
Key or fob programming
Programmed to your car on-site
From$129+
All keys lost
No key at all, built from your VIN
From$129+
Every job includes
- Key or fob cut to your VIN
- Programmed & tested on-site
- Mobile: we come to your car
- Flat total quoted before dispatch
Prices are starting points. Proximity and push-to-start smart fobs cost more than a basic chip key, and the exact flat total comes with your VIN on the call, before any work.
Chrysler Keys for Fleets, Dealers and Companies
Run Chrysler vehicles for your business? We cut and program keys where the vehicles are parked in McKinney and nearby cities, quote each vehicle as a flat total your company approves first, invoice the business and send a W-9 and certificate of insurance on request. No call-out fee.
Dealerships & fleets
Trade-ins with no key, spares for the lot and fobs for work vehicles. Several vehicles go on one written estimate.
Fleet and dealer keysYour home locks
Same licensed team for rekeys, lock changes and smart lock installs at your house.
Residential locksmithYour business locks
Master key systems, access control, panic bars and commercial door repair, invoiced to the company.
Commercial locksmithWhy Choose Us
Locked out is stressful enough. Here's why neighbors in McKinney and nearby cities call us first.
Licensed Company
Texas locksmith company license #B31197901 (DPS Private Security Bureau), insured. You deal with Apex directly, not a call center.
Transparent Upfront Pricing
You get a flat quote before any work starts. No call-out games, no surprise add-ons.
Same-Day Service
A mobile tech comes to your car, home or business the same day, seven days a week from 8 AM to 8 PM.
No Call-Out Fee
You pay for the job, not the trip. The flat total is quoted on the phone before anyone drives out.
What Do Chrysler Owners Ask About Keys?
Straight answers for Chrysler drivers in McKinney and nearby cities: key types, what to have ready, on-site programming and how the price is set.
A transponder remote-head key for an older 300 usually costs less than a proximity fob for a newer one. The flat total is quoted on the phone, with no call-out fee.
Yes. The Pacifica uses a push-to-start proximity fob, and we program it at your location. That covers a damaged fob, an extra spare or a full lost-all-keys situation.
Yes. We pull the cut by VIN, cut a new laser-cut blade and program a fresh fob to the immobilizer. If every fob is lost, we can clear the old ones so a missing key will not start the car.
Most Chrysler blades are high-security laser-cut keys, and the chip or fob still has to be programmed to the immobilizer. A mobile locksmith with the cutter and programmer can do both at the car.
Wherever the car is parked in the cities we serve, including Carrollton, Addison, Richardson and McKinney. Most Chrysler calls are handled the same day.
No. A Chrysler key fob can be programmed by a locksmith with dealer-level equipment, and it works the same as one programmed at the dealership. The dealer usually needs the car on its lot, which means a tow when all keys are lost. We do it on-site, at your car, and the flat total is quoted on the phone before anyone drives out. See how the two compare on our locksmith vs dealer page.
Deciding where to go? Dealer, AutoZone or locksmith? compares cost, wait and what each one can program.
Chrysler Key Service in McKinney and Nearby Cities
Locked out in McKinney? We come to you today.
Licensed, upfront, and on call daily 8 AM–8 PM in McKinney and nearby cities. One quick call and a tech is on the way.